Job Description
Workshop Manpower Requirement
Key Words - Shell and tube heat exchangers, pressure Vessel , tanks,Fabricator, Orbital welders, Heat exchangers machining, heat exchangers design, Fabrication workshop electrical maintenance, Fabrication workshop mechanical maintenance, Tube sheet Drilling,
1
Fabricator/
Fitter
Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Read and interpret fabrication drawings, isometrics, and GA layouts for pressure vessels, tanks, and heat exchangers; perform accurate layout, marking, cutting, beveling, and fit-up of components as per design and ASME/API standards; , operate fabrication tools safely, follow HSE guidelines, report discrepancies, and maintain a clean, organized work environment.
Total exp - 5-20 Years
2
Foreman
Lead the team, Read and interpret fabrication drawings, isometrics, and GA layouts for pressure vessels, tanks, and heat exchangers; Check and perform accurate layout, marking, cutting, beveling, and fit-up of components as per design and ASME/API standards; coordinate with welders, QC inspectors, and engineers to ensure proper alignment, dimensional accuracy, and compliance with ITPs and WPS; conduct fit-up inspections, operate fabrication tools safely, follow HSE guidelines, report discrepancies, and maintain a clean, organized work environment.
Total exp - 5-20 Years
3
Welders
Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Perform welding on pressure vessels, tanks, and heat exchangers using SMAW, FCAW, GTAW (TIG), and Orbital processes; hold valid 6G qualification with proficiency in all positions; weld Carbon Steel, Stainless Steel, and Alloy Steel as per WPS; ensure proper fit-up, alignment, and temperature control; coordinate with fabricators and QC for inspections; maintain equipment, consumables, and ensure safety and cleanliness at the work area.
Total exp - 5-20 Years
4
SAW/Strip Cladding Welding machine Operator
The SAW/Strip Cladding Welding Machine Operator is responsible for operating Submerged Arc Welding (SAW) and Strip Cladding machines to apply corrosion-resistant overlays on pressure vessels, tanks, heat exchangers, and related equipment. The operator sets up, calibrates, and operates the machines according to approved WPS and project requirements, performs cladding on carbon steel, stainless steel, and alloy materials to achieve the specified thickness and quality, and monitors welding parameters, travel speed, and deposition rates to ensure uniform results.
Total exp - 5-20 Years
5
Orbital Welding Machine Operator/Welder
Tube to Tube sheet Welding
Set up and operate orbital welding machines for tube-to-tubesheet and pipe welds; program parameters per WPS; align components accurately; monitor and adjust welding for quality compliance; perform visual and NDT checks; and maintain equipment through cleaning, inspection, and routine servicing.
Total exp -5-20 Years
6
Welding Foreman
Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Lead and supervise welding operations for pressure vessels, tanks, heat exchangers, and related equipment; manage SMAW, FCAW, GTAW (TIG), and Orbital welding for CS, SS, and Alloy Steel; allocate welders and resources per WPS, PQRs, and material requirements; monitor fit-up, preheat, interpass temperature, PWHT, and consumables; maintain weld traceability, logbooks, and repair records; coordinate with QA/QC for inspections and NDT; and ensure all welding activities comply with ASME, API, AWS standards, and HSE safety protocols.
Total exp -15+ Years
7
Lathe Machine Operator
Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Operate heavy-duty lathe and radial drilling machines to machine large components such as tubesheets, baffle bundles, and flanges for pressure vessels, tanks, and heat exchangers; select appropriate tools and fixtures for CS, SS, and AS materials; interpret engineering drawings to achieve precise tolerances; set up, calibrate, and monitor machines for accuracy and surface finish; and perform routine maintenance and troubleshooting to ensure smooth operation.
Total exp -5-20 Years
8
Heat Exchanger Retubing Technician
Heat Exchanger Re-Tubinng
Perform complete heat exchanger retubing, including bundle removal and installation; operate tube pulling machines, expanders, and related tools; carry out tube cutting, pulling, and expansion using manual or automated methods; ensure accurate tube alignment and spacing per specifications; and follow technical drawings, procedures, and safety standards.
Total exp -5-20 Years
9
VMC machine Programmer cum Oprator
Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Operate and program VMC, CNC lathes, and plate cutting machines for precision fabrication, including tubesheet drilling and machining; interpret engineering drawings, nesting plans, and G/M codes; set up machines with appropriate tooling for CS, SS, and alloy materials; monitor quality, adjust programs as needed, and maintain equipment for safe and efficient operation.
Total exp -5-20 Years
10
CNC Plate Cutting Machine Operator/Technician
Operate and program CNC plate cutting machines for precision fabrication, nesting plans, set up machines with appropriate tooling for CS, SS, and alloy materials; monitor quality, adjust programs as needed, and maintain equipment for safe and efficient operation.
Total exp -5-20 Years
11
CNC Plate Rolling Machine
Operate and program CNC plate Rolling machine for precision fabrication of CS, SS, and alloy materials; monitor quality, adjust programs as needed, and maintain equipment for safe and efficient operation.
Total exp -5-20 Years
12
Heavy fabrication Workshop Electrical Maintenance Technician
Workshop of Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Perform maintenance and troubleshooting of workshop electrical systems, including welding machines, CNC lathes, compressors, and motors; inspect and repair control panels, DBs, wiring, and lighting; conduct preventive maintenance; read schematics for accurate diagnostics; follow safety protocols; coordinate with production and engineering teams; maintain maintenance records; and manage spare parts inventory.
Total exp -5-20 Years
13
Heavy fabrication Workshop Mechanical Maintenance Technician
Workshop of Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Perform maintenance, inspection, and troubleshooting of mechanical systems on workshop equipment, including lathes, compressors, CNC machines, and welding machines; carry out preventive and corrective maintenance on pumps, valves, bearings, gears, and hydraulic/pneumatic systems; read mechanical drawings and manuals; dismantle, repair, and assemble components; maintain records; conduct inspections for reliability; and manage spare parts and tools inventory.
Total exp -5-20 Years
14
Design Engineer
Static equipment Design
Responsible for the design and engineering of pressure vessels, storage tanks, and heat exchangers per ASME, API, and TEMA standards; ensures compliance with Saudi Aramco requirements and client-specific certifications; performs mechanical calculations using PV Elite, COMPRESS, or similar tools; manages and reviews outsourced design deliverables; supports bid evaluations, scope reviews, and client clarifications; coordinates with QA/QC for inspection and material compliance; prepares nozzle loadings, supports, weld designs, and assembly drawings; provides fabrication support and resolves shop floor queries; and integrates all design documents into complete project engineering deliverables.
Total exp -3-10 years
15
QA/QC Engineer
Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Lead QA/QC inspections for pressure vessels, tanks, and heat exchangers in Oil & Gas or petrochemical projects, ensuring compliance with ASME, API, and Aramco standards; possess 10+ years industrial experience with 6 years in QA/QC and 4 years in Oil & Gas; certified CWI or CSWIP with ASNT Level II in NDT (UT, PT, MT, RT, VT); proficient in ASME, API, AWS, and relevant fabrication/inspection codes; review and approve WPS, PQRs, and welder qualifications; monitor NDT activities and personnel; manage outsourced fabrication/inspection, coordinate with vendors and third-party inspectors; prepare ITPs, inspection reports, and final quality dossiers; interface with clients for hold/witness points, DCL submissions, and testing; handle NCRs, corrective actions, technical clarifications, and drive quality improvements.
Total exp -10+ Years
16
Planning Engineer
An experienced Planning Engineer to manage fabrication, welding, and assembly of pressure vessels, tanks, and heat exchangers. The role includes interpreting engineering drawings, supervising workshop operations, ensuring quality and HSE compliance, and handling ERP-based project planning, consumption tracking, vendor management, and scheduling. Knowledge of Primavera P6, MS Project is must. Oil & Gas fabrication experience, strong ERP skills, and leadership capabilities.
Total exp -5-10 years
17
Gas Cutter
Total exp -5-20 Years
Workshop Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Oxyfuel Gas Cutting of Plates and pipes, knowledge of gases, able to operate all types of gas cutting machine, shoul have knowledge of cutting parameters.
18
Grinderman
Total exp -5-20 Years
Workshop Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Experience grinding, finishing, and surface preparation of components used in heat exchanger and pressure vessel manufacturing, ensuring smooth edges, proper weld profiles, and dimensional accuracy as per fabrication drawings and applicable. The role includes removal of burrs, slag, and welding defects, assisting in fit-up preparation, operating grinding tools safely, Should operate AG4, AG7, AG9 Etc
19
Riggers
Total exp -5-20 Years
Workshop Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
Knowlege of lifting methods, knowlege of tyre mouted cranes, shoul have knowledge of operating eot cranes. .Inspecting rigging equipment before use, ensuring proper load balance and signaling during lifts, coordinating with crane operators and fabrication teams, strictly following HSE requirements.
20
Supervisor-Production
Total exp -3-6 Years
Workshop Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
The Production Engineer is responsible for planning, coordinating, and controlling production activities for the manufacturing of heat exchangers and pressure vessels in compliance with Saudi Aramco requirements, applicable ASME/API codes, and approved project specifications. The role includes developing production schedules, optimizing manpower and resources, ensuring adherence to quality and safety standards, coordinating with engineering, QA/QC, and inspection teams, monitoring progress against milestones, resolving technical and production issues, supporting Aramco inspections and audits, and driving continuous improvement while ensuring safe and timely project execution.
21
Senior Engineer-Production
Total exp -5-15 Years
Workshop Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
The Senior Production Engineer is responsible for planning, coordinating, and controlling production activities for the manufacturing of heat exchangers and pressure vessels in compliance with Saudi Aramco requirements, applicable ASME/API codes, and approved project specifications. The role includes developing production schedules, optimizing manpower and resources, ensuring adherence to quality and safety standards, coordinating with engineering, QA/QC, and inspection teams, monitoring progress against milestones, resolving technical and production issues, supporting Aramco inspections and audits, and driving continuous improvement while ensuring safe and timely project execution.
22
Store Keeper
Total exp -5-20 Years
Workshop Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
The Storekeeper is responsible for receiving, inspecting, storing, and issuing raw materials, consumables, tools, and equipment used in heat exchanger and pressure vessel manufacturing in compliance with Saudi Aramco requirements and project specifications. The role includes maintaining accurate inventory records, ensuring proper material identification, traceability, and preservation, coordinating with production, procurement, and QA/QC teams, verifying material documentation (MTCs), following HSE and warehouse safety procedures, and maintaining a clean, organized, and audit-ready store facility.
23
Store-Supervisor
Total exp -5-20 Years
Workshop Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
he Store Supervisor is responsible for overseeing all store and warehouse operations for heat exchanger and pressure vessel manufacturing in compliance with Saudi Aramco requirements and project specifications. The role includes supervising storekeepers, controlling receipt, storage, and issuance of materials, ensuring proper material identification, traceability, preservation, and documentation (including MTCs), coordinating with production, procurement, QA/QC, and inspection teams, maintaining accurate inventory records, ensuring HSE compliance, supporting Aramco audits and inspections, and maintaining a clean, organized, and efficient store facility.
24
Safety Officer
Total exp -5-10 years
Workshop Manufacturing of pressure vessels, tanks, heat exchangers, Pipings
The Safety Officer is responsible for implementing and monitoring health, safety, and environmental (HSE) practices for heat exchanger and pressure vessel manufacturing activities in compliance with Saudi Aramco standards, applicable regulations, and project HSE requirements. The role includes conducting safety inspections, risk assessments, and toolbox talks; ensuring safe work practices for fabrication, lifting, hot work, and confined space activities; monitoring permit-to-work systems; investigating incidents and near misses; maintaining HSE records and reports; coordinating with project teams and Aramco representatives; and promoting a strong safety culture across the facility.
25
Boiler Operator
Total exp -5-10 years
Operating of Smoke tube Boiler of 5Ton Capacity
Operating of Smoke tube Boiler of 5Ton Capacity, Shoul have knowledge of troublshouting of boiler, safety valves etc.
Pls share Filled ABIS TRACKER with Salary details -
S.No
Business Unit
Department
Name
Nationality
Birthday (mm/day/year)
Current Work Location (IK)
Passport #
Highest Education Attainment
University
GPA
Year Graduated
Total Years Of Experience
Position Applied for
Industry Exp. (mos/yrs)
Local Transfer (yes/no)
Notice Period
Current Salary (Basic+ Allowances)
Expected Salary
Agency name
Mobile #
Email ID
AL BARRAK
